Bulk Discounts for AnalytikJena Blak-Ray B-100A UV Lamp
Below are the available bulk discount rates for each individual item when you purchase a certain amount
Buy 5 - 9 and get 5% off
Buy 10 or above and get 10% off
Product Description
AnalytikJena's BlakRay B-100A and B-100AP lamps are 100 watt, 365nm longwave UVA lamp with an ergonomic ballast base, designed for non-destructive testing and fluorescence inspection. Lamp head can be separated from the base with a secondary electrical power cord for additional mobility. While attached, the lamp head's pistol grip handle balances the lamp comfortably in the hand.
Applications
Fluorescence Inspections
Non Destructive Testing
Leak Detection
Readmission
Features
The lamp head connects to the ballast base for hands free use allowing the lamp head to rotate a full 360°,
The lamp's 100W bulb (p/n H44GS100M) is rated for a 5000 hour typical life time, with an initial UVA intensity of 21,700 µW/cm2 at 2" and 8,900 µW/cm2 at 10",
Illuminated spot size is approximately 5" (127mm) diameter,
Choice of electrical cord lengths:
8 ft. primary and secondary electrical cords,
20 ft. primary and secondary electrical cords, with 2 cord holders on sides of ballast.
Choice of Lamp Housing
The Cool-Touch heat-resistant plastic lamp housing allows users to handle the lamp head regardless of how long the lamp has been operating. Lamps can be placed face down on a working surface without heat damage to the filter,
The aluminum lamp head has a scratch resistant powder coated finish.
Choice of electrical input power: 120V or 240V.
Specifications
Part Numbers
Description
115V
230V
Model
95-0044-22
95-0044-02
B-100A
Aluminum Lamp Head, 8 ft cords
95-0044-03
95-0044-04
B-100A/R
Aluminum Lamp Head, 20 ft cords
95-0127-01
95-0127-02
B-100AP
Plastic Lamp Head, 8 ft cords
95-0127-06
95-0127-07
B-100AP/R
Plastic Lamp Head, 20 ft cords
Dimensions:
Aluminum Lamp Head: 8.5D x 5.5Dia. in. (216 x 140mm)
AnalytikJena's products are guaranteed to be free of defects in materials, workmanship and manufacture for one (1) year from date of purchase, except as follows:
- Consumable and disposable parts are guaranteed to be free from defects in manufacture and materials for ninety (90) days from date of purchase.
- UV tubes and filters are guaranteed to be free from defects in manufacture and materials for ninety (90) days from date of purchase.
- AnalytikJena Transilluminators are guaranteed to be free from defects in manufacture and materials for two (2) years from date of purchase.
If equipment failure or malfunction occurs during the warranty period, AnalytikJena shall examine the inoperative equipment and have the option of repairing or replacing any part(s) which, in the judgment of AnalytikJena , were originally defective or became so under conditions of normal usage and service.
No warranty shall apply to this instrument, or part thereof, that has been subject to accident, negligence, alteration, abuse or misuse by the end-user. Moreover, AnalytikJena makes no warranties whatsoever with respect to parts not supplied by AnalytikJena or that have been installed, used and/or serviced other than in strict compliance with instructions appearing in this manual.
In no event shall AnalytikJena be responsible to the end-user for any incidental or consequential damages, whether foreseeable or not, including but not limited to property damage, inability to use equipment, lost business, lost profits, or inconvenience arising out of or connected with the use of instruments produced by AnalytikJena . Nor is AnalytikJena liable or responsible for any personal injuries occurring as a result of the use, installation and/or servicing of equipment.
This warranty does not supersede any statutory rights that may be available in certain countries.